參考價格
90-100萬元型號
20250530-1品牌
江蘇圣曼產地
常州樣本
暫無處理量:
ZLG-7.5×1.2能耗:
100干燥介質:
空氣適用物料:
顆粒狀操作方式:
連續式工作原理:
沸騰看了?水蛭流化床干燥機ZLG-7.5×1.2的用戶又看了
虛擬號將在 180 秒后失效
使用微信掃碼撥號
水蛭流化床干燥機ZLG-7.5×1.2
水蛭專用流化床干燥機,包括一個密閉的上部設置有加料口的干燥室,所述加料口處設置有用于密封干燥室的門;所述干燥室的中部設置有用于將所述干燥室分隔成上腔室和下腔室的隔板,所述下腔室中設置有用于鋪放水蛭的表面密布通孔的多孔板,所述隔板上設置有連通上腔室和下腔室的排氣管,所述排氣管上設置有可按一定的頻率開啟的脈沖電磁閥門;還包括真空泵和空壓機。水蛭專用流化床干燥機,采用脈沖式壓力爆破原理,使得水蛭生物體內的組織液在壓力差的作用下迅速穿透水蛭的細胞壁和表皮向外蒸發,進而可有效地解決因水蛭表皮生物滲透性低,使得水蛭的含水率難以降低的技術問題。
摘要(英):The invention discloses a special leech fluid bed dryer. The special leech fluid bed dryer comprises an aright drying chamber, wherein the upper portion of the drying chamber is provided with a feed port, and a door used for sealing the drying chamber is arranged at the feed port; a partition board used for separating the drying chamber into an upper cavity and a lower cavity is arranged in the middle of the drying chamber; the lower cavity is internally provided with a perforated plate used for carrying leeches, and through holes are densely formed in the surface of the perforated plate; the partition board is provided with exhaust pipes communicating the upper cavity with the lower cavity; each exhaust pipe is provided with an impulse electromagnetic valve which can be opened according to a certain frequency. The special leech fluid bed dryer further comprises a vacuum pump and an air compressor. According to the special leech fluid bed dryer, the impulse type pressure blasting principle is adopted, and tissue fluid in leech organisms rapidly penetrates through cell walls and epidermises of the leeches to evaporate outwards under the action of pressure difference, so the technical problem that the water content of the leeches is hard to reduce due to the fact that the bio-osmosis performance of the epidermises of the leeches is low is effectively solved.
暫無數據!
經過近百個日夜的堅持,常寶終迎歷史性首勝,進一球、贏一場的小夢想得以實現。球迷眼里,不斷丟筆劃的常州,努力的讓人心疼,就連對手都希望常寶進一個。一次次被沖擊,一次次又卷土重來,真乃千淘萬漉吹盡狂沙。在
黑箱子里面的高科技——噴霧干燥能源回收傳統噴霧干燥(開式),為使物料終水含量低,排風溫度往往高達90℃或更高。閃蒸干燥、流化床沸騰干燥,這類使用氣體直接與物料接觸實現干燥效果的工藝,排風溫度也會達到5
7月15日,貴州磷化集團年產3萬噸磷酸鐵項目一次性投料試車成功,并產出合格產品,這標志著貴州磷化在新能源電池材料產業高質量發展“賽道”上再次邁出堅實步伐。2021年12月2日,貴州磷化集團年產3萬噸磷
聊聊粉末制粒和包衣(二)在(一)中,我們提到粉末制粒和包衣的區別和聯系,當底物粉末粒子太小的時候,要在單個粉末外層包裹衣膜,實在太難了。初期一定是制粒過程,當形成了一定粒度的粒子后,后面的才是包衣。“
聊聊粉末制粒和包衣(一)無論是醫藥,食品,新能源材料,陶瓷和化工,都是從原料至成品的過程,可以視為“API->制劑”的路徑。然而,因為不同領域的特殊性,原料至成品采用的工藝并沒有做到融會貫通。當